16
Different drill and driver bits (size of Hex 6.35 mm usually with 25
mm or 50 mm long) can be used with this product depending on the
material being worked with.
INSERTING PROCEDURE:
1.
Turn the chuck sleeve (2) anticlockwise until the chuck jaws are
opened wide enough to insert the drill bit.
2.
Insert the drill bit all the way to the stop. If using a 25 mm driver bit,
insert it into the socket of a bit holder.
3.
Turn the chuck sleeve clockwise until the drill bit is properly fastened
in the chuck jaws.
REMOVING/REPLACING:
Turn the chuck sleeve (2) anticlockwise until the chuck jaws are
opened wide enough to remove the bit.
Remove the bit and insert a new one as described above if desired.
DRIVER/DRILL BITS
IBL BM18-60
WARNING!
Always use drill bits according to the intended use!
Never use a drill bit intended for working on wood for working on
steel or vice versa! Observe the technical requirements of this
product when purchasing and using drill bits! Some drill bits become
hot during use, handle them carefully! Wear protective gloves!
-
1 - - 2 - - 3 -
