iBell Tools ED10-30/06-91, Operator'S Manual

Page: 6 / 19

5

Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer
at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and
off.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool
accidentally.

Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous
in the hands of untrained users.

Keep cutting tools sharp and clean . Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.

Keep handles and grasping surfaces dry, clean and free from oil
and grease.
Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected situations.
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise:

Health defects resulting from vibration emission if the product is
being used over long periods of time or not adequately managed
and properly maintained.

Injuries and damage to property due to broken cutting attachments
or the sudden impact of hidden objects during use.

Danger of injury and property damage caused by other objects or
due to natural reactions or calamities.
POWER TOOL USE AND CARE
IBL ED 10-30|06-91
RESIDUAL RISKS