13
Change the rotational direction from forward to reverse by turning
the forward/reverse rotation lever (4).
1. Move the forward/reverse rotation control lever to the left (as
seen from the operator position) in order to use the product in a
clockwise rotational mode.
2. Move the control lever to the right (as seen from the operator
position) in order to use the product in anticlockwise rotational
mode.
FORWARD / REVERSE ROTATION CONTROL
WARNING!
Only change the rotational direction when the product
is switched OFF and has come to a complete stop! Always ensure that
the forward/reverse rotation lever is adjusted to the correct position
depending on the intended operation! Always slide the
forward/reverse rotation control as far as it will go! Do not use the
product with the control lever in any other intermediate position!
Position
Application
Rotational
direction
-
1
-
-
2
-
Drilling into material
Loosen drill bits
IBL ED 10-30|06-91
4
Summary of Contents for ED10-30/06-91
Page 1: ...ED10 30 06 91 0 ...
Page 2: ...1 ...
