6
0123
4567
Demo
state
0-2
0 is normal state,1
is demo state, 2 is
empty please note,
this is for
engineering
purpose only, and
there is no need to
adjust this for
normal consumers
0
2.
Vertically short press the OK button
：
Switch the display information, e.g. water temperature, battery
voltage,
speed
3.
Beep sound on/off: Push function setting button down for 5 sec, all the
Alarm
function off, again push it 5 sec, Alarm function on.
4.
Restore the factory Settings:
try to reset the TE-HUD, slide setting scroll to "L" for 5 seconds, all the
LED
lights will be turned on, repeat the action for 5 seconds again, all
setting will be
reset to factory default setting and the TE-HUD should be
good
.
Summary of Contents for TE-HUD
Page 6: ... ...
