background image

5

Recording mode 

When 

the car engine 

start

s

, the device will start recording automatically and the blue 

light will flash during this time. When the 

engine 

stop

s

, it will save the video and shut 

off. The video segment will be saved on the TF card, when the card is full, it will 

overwrite the previous videos. Recording segment time can be 

set in the menu, and the options are 1/3/5 minutes.  

G-sensor

The device is 

equipped with a 

built-in G-sensor, if the car is 

impacted

 heavily, it will 

lock the video file and keep them as a special video beginning with EVE, which will 

never be overwritten unless you delete it manually. At the same time there will be a 

lock icon at the 

above 

right.

Photography 

With the device powered on, a short 

Mode 

button

 

press will enter the photography 

mode, and the icon at top left corner is changed from video camera to camera. 

A s

hort 

press 

of 

the 

Mode

 button 

twice

 to

 return 

to recording mode.

USB MODE 

The device supports USB direct read. Use the USB cable to connect the device to your 
computer to read the existing video.

Summary of Contents for TE-DVR-15









Reviews: