4
Powering on / off the
DVR
1. Manually turning on / off the device: A long press of the
POWER
button and the
startup logo will be shown on the display. Another long press on the
Power
button
will turn off the device. The press duration required is approximately 3 seconds.
2
．
Automatic operation
If the device is connected
to a
switched power outlet
, when the car is started, the
device starts video recorder mode automatically after a delay time. When the
engine is switch off, the device keeps recording 10 seconds automatically.
Note:
When the power supply is from the built-in battery, the device can record in motion
detection mode and switch off automatically when the battery is low.
Reset
When the device has an abnormal situation due to improper
operation, press the reset button, then power the device back on. After startup it will
return to normal.
II
Basic operations
Switching mode
This machine has four operating modes: video, photo and clip playback, and
photo view. Press the MODE button to switch.
Menu and system settings
In the photo or video mode, press MENU button twice to enter the "System Settings"
option, Press the Up / Down buttons to select the desired setting item; Press OK button
to confirm the setting, press the Menu key again to exit the menu.
