iBeam TE-CDVR-4, User Manual

Page: 36 / 40

~
19
~
Figure 59. Input Alarm list
Click the corresponding lines to setup
Figure 60. Input Alarm setting
There are three input modes: high level, low level and open. For positive trigger, the
normal trigger level is high, but if the reversed logic is enabled, the trigger level is changed
to low level and open. It is same for negative trigger.
Alarm Input Trigger status list
7.2 AlarmOut setting
You can set up the type of alarm output (interact, remote, manual), Manual is used to
debug the device.
Alarm Trigger Positive trigger Negative trigger
Reversed
Logic
No High level Low level
Reversed
Logic
Yes Low level/Open High level/Open