2.4 Video Output
Figure 21. Video Output
2.5 On/Off setting
On/Off “Ctrl” setting is for
turning
on and shutting down the device automatically
WHEN THE DEVICE IS ON STANDBY AFTER ACC IGNITION OFF. You can set up
three time segments.
ACC Delay: You can set up the device to keep working for a g
i
ven time period after
the vehicle ACC ignition off.
Figure 22. On/Off Control setting
The On/Off “Volt” is for setting the voltage to shut down and start on the device, this
feature can avoid the device drain
ing
the vehicle’s battery.
The device will detect the current voltage automatically, when the vehicle’s battery
voltage is lower than the Shut.Volt, the device will shut down automatically to avoid
discharging
the battery. When the voltage is higher than the PowerVolt, the device can
be
turned
on.
~
7
~
Summary of Contents for TE-CDVR-4
Page 2: ...Hardware Guide ...
Page 5: ...2 2 System connection System connection ...
Page 15: ...Software Guide ...
