iBeam IsatDock LITE, User Manual

Page: 22 / 28

22
LOCATION BUTTON MODE ACTION LED/SOUND
Ringer Press
(1 second)
Out of Call:
Toggle through the available ring tones Hear ring tone change.
Mute Press ON/OFF
In a Call:
Mute the microphone (uplink) on the privacy handset
(optional accessory) if connected to cradle.
LED turns RED - Muted
LED turns OFF - Not muted
Up In a Call
Increase volume on the privacy handset (optional
accessory) if connected to cradle.
Audio will sound louder in privacy handset with each press.
Down In a Call:
Decrease volume on the privacy handset (optional
accessory) if connected to cradle.
Audio will sound quieter in privacy handset with each press.
+
Brightness dual
button simultaneous
press
(1 second)
Out of Call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after
5 seconds after the last button press.
All LED’s will change to WHITE and a single beep will sound
when entering brightness change mode.
A short double beep will sound when exiting change mode.
IsatDock LITE Buttons/LED Status
MUTE GREEN RED
ILLUMINATED N/A Uplink audio muted
STATUS GREEN RED
ILLUMINATED Handset registered and able to make a call Handset not registered / no signal and cannot
make a call
FLASHING Call in Progress N/A
ALTERNATING N/A Error detected in communicating with IsatPhone
Pro handset.
Flashing RED/BLUE
1. Mute
2. Ringer
3. Up & Down
4. LED STATUS
IsatDock LITE Front Panel
2
1
3
4