IsatDock LITE - Installation & User Manual
17
4) Connecting the DC Power Cable
The DC power cable supplied has three wires,
RED, BLACK and YELLOW.
The RED and BLACK wires are used for the
power connection while the YELLOW wire can
be connected to a vehicle’s accessories, ignition
or a switch.
By default, the IsatDock LITE will stay on for 20
minutes after this input is switched off. If a call
is in progress while this occurs, the IsatDock
LITE will stay on for 20 minutes after the call
is terminated. Please follow the steps below
to connect the DC power cable to the vehicle
battery power and the IsatDock LITE.
1.
Route the wire end of the DC power
cable to the connection point. DO NOT
apply power until the following steps
3 Long Screws
M4 x 18 &
washers
5.
Plug the Privacy Handset RJ9 connector
into the bottom of the docking unit, as
per image below. Privacy Handset mode
is enabled when the handset is removed
from the cup. Please ensure to re-dock the
Privacy Handset when not in use.
are completed.
2.
Connect the BLACK wire to the negative
terminal of the battery (10A fuse
recommended) or the vehicle chassis (if
negatively grounded chassis).
3.
Connect the RED wire to the positive
terminal of the battery. It is recommended
to add a 5A fuse (supplied) between them.
4.
Connect the YELLOW wire to the vehicle
accessory power. If the accessory power
is unavailable, this may be connected
to a vehicle ignition voltage. It is
recommended to add a 1A fuse between
them. The accessory wire enables the
IsatDock LITE to turn on and off as the
vehicle key is enabled or disabled. If this
function is not required, the YELLOW wire
MUST be connected to the RED wire.
5.
Connect the 4-way Microfit connector on
the DC power cable to the 4-way power
connector on the rear cable loom of the
IsatDock LITE.
YELLOW
BLACK
RED
RED
(+) Vin 10 to 32VDC
BLACK
(-) OV Power Ground
YELLOW ON/SLEEP
To Battery Positive Terminal
(Requires 5A Fuse)
To Negative Terminal or chassis
To ON/OFF switch
(1A Fuse recommended)
Summary of Contents for IsatDock LITE
Page 1: ...IsatDock LITE User Manual ...
