8
GB
SAFETY INSTRUCTIONS
Training
1. Read the instructions carefully (fig.2). Be familiar with the
controls and the proper use of the equipment.
2. Never allow children or people unfamiliar with these
instructions to use the lawnmower.
3. Never mow while people, especially children, or pets are
nearby (fig.3).
4. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
1. While mowing, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or
wearing open sandals.
2. Thoroughly inspect the area where the equipment is to be
used and remove all objects which may be thrown by the
machine (fig.3).
3. Operate only with either bag or Mulching plug in position.
4. WARNING - Petrol is highly flammable (fig.4).
- Store fuel in containers specifically designed for this
purpose.
- Refuel outdoors only and do not smoke while refuelling.
- Add fuel before starting the engine. Never remove the
cap of the fuel tank or add petrol while the engine is running
or when the engine is hot.
- If petrol is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and avoid
creating any source of ignition until petrol vapours have
dissipated.
- Replace all fuel tanks and container caps securely.
5. Replace faulty silencers.
6. Before using, always visually inspect to see that the
blades, blade bolts and cutter assembly are not worn or
damaged. Replace worn or damaged blades and bolts in
sets to preserve balance.
Operation
1. Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
2. Mow only in daylight or in good artificial light.
3. Avoid operating the equipment in wet grass, where feasible.
4. Always be sure of your footing on slopes.
5. Walk, never run.
6. For wheeled rotary machines, mow across the face of
slopes, never up an down.
7. Exercise extreme caution when changing direction on
slopes.
8. Do not mow excessively steep slopes (> 30%) (fig. 5).
9. Use extreme caution when reversing or pulling the
lawnmower towards you.
10. Stop the blade(s) releasing the System 2 lever if the
lawnmower has to be tilted for transportation when crossing
surfaces other than grass and when transporting the
lawnmower to and from the area to be mowed.
11. Never operate the lawnmower with defective guards. Make
sure the chute door is closed or safety devices, such as
Mulching plug and/or catchers, are in place (fig. 6).
12. Do not change the engine governor settings or overspeed
the engine.
13. Start the engine or switch on the motor carefully according
to instructions and with feet well away from the blade(s).
14. Firmly keep the lawnmower on level ground when starting
the engine.
15. Do not start the engine when standing in front of the
discharge chute if open.
16. Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times (fig. 7).
17. Never pick up or carry a lawnmower while the engine is
running (fig. 8).
18. Stop the engine and disconnect the spark plug wire:
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the lawnmower;
- after striking a foreign object. Inspect the lawnmower for
damage and make repairs before restarting and operating
the lawnmower;
- if lawnmower starts to vibrate abnormally (check
immediately).
19. Stop the engine whenever you leave the lawnmower and
before refuelling.
20. Reduce the throttle setting during engine shut down and,
if the engine is provided with a shut-off valve, turn the fuel off
at the conclusion of mowing.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure equipment
is in safe working condition.
2. Never store the equipment with petrol in the tank inside a
building where fumes may reach an open flame or spark.
3. Allow the engine to cool before storing in any enclosure.
4. To reduce the fire hazard, keep the engine, silencer, battery
compartment and petrol storage area free of grass, leaves
or excessive grease.
5. Check the grass catcher frequently for wear or
deterioration.
6. Replace worn or damaged parts for safety.
7. If the fuel tank has to be drained, this should be done
outdoors.
8. Wear strong work gloves when removing and reinstalling
the blade (fig. 9).
9. Periodically check the blade which should always be kept
sharp. Please contact your IBEA dealer for blade sharpening
or balancing.
BEFORE OPERATING
Applying the handlebar (fig. 10)
Assemblying the grassbag(fig. 11)
Filling the crankcase with oil (fig. 1)
The engine is supplied without oil in the crankcase. Therefore,
before starting the engine,slowly oil in the sump (SAE30 or
SAE10W-30).
ATTENTION:
Do not fill beyond level as this may damage the engine.
Do not mix oil with fuel. For further information we
recommend that you consult the manual supplied by
the engine manufacturer.