IBCcontrol VariMax100M, Manual

Page: 26 / 32

Address Name Designation Data
form Read/
Write Factor Unit
10 Current rotor
speed Only calculated if the speed
reference value remains constant
between two pulses on the
rotation monitor. Displays 0 if no
value is available.
To ensure the correctness of
the measured value the speed
reference value should be
changed. This will cause the
registry to read as 0 until the
current value is displayed.
UINT 16 Read 100 rpm
11 Fault registry Read integer equals a fault code
generated in Sub-faults,
address 33-52. UINT 16 Read
12 Fault registry Reads 1 if VariMax has tripped. UINT 16 Read
13 Fault registry Read value equals a 16-bit integer
where the bit numbers match
fault codes that are on addresses
1-16 in Discrete Input. UINT 16 Read
14 Fault registry Read value equals a 16-bit integer
where the bit numbers match
fault codes that are on addresses
17-23 in Discrete Input. UINT 16 Read
15 Fault registry Read value equals a 16-bit integer
where the bit numbers match
fault codes that are on addresses
33-48 in Sub-faults. UINT 16 Read
16 Fault registry Read value equals a 16-bit integer
where the bit numbers match
fault codes that are on addresses
49-52 in Sub-faults. UINT 16 Read
Continued from previous page
24
25