Qscan User’s Guide Version 1.4
Page 0
PROGRAMMING
BARCODE
General Barcode Options
X012 a m k c
a
alpha delete
0=off
1=on
m
masking
0=off
1=on
k
Kronos mode
0=off
1=mode1, 2=mode2
c
Usic/Cac
0=off
0=off, 1=on, 2=required
Turn on Alpha Delete to delete any alpha characters from the barcode.
This is useful when a numeric only output is required such as wiegand.
Masking allows you to mask out information from the barcode, leaving
only that portion of the barcode that you wish to process.
Kronos mode autodiscriminates Kronos cards (17 digit code 39 and 18
digit I 2of5). Kronos mode 1 extracts the first 2 digits of the site code
and the lowest 5 digits of the ID. Kronos mode 2 forces a site code of 0,
and extracts the lowest 9 digits of the ID.
Usic/Cac sets the options for processing DOD Usic cards and Cac cards.
Set to 0, Usic and Cac barcodes are processed like any other barcode. If
set to 1, Usic and Cac cards are processed according to the parameters
that you have programmed. If set to 2, all barcodes are ignored unless
they meet the characteristics for Usic and Cac cards.
