IBC SOLAR AeroFix 15-S, Installation Instructions Manual

Page: 11 / 58

11
Version 18.01, 1-Mar-2018
Load-bearing reserve
In order to apply the additional loads from the PV system onto the roof, the load-bearing capacity of the
roof and the insolation must be assured by a static expert before planning the installation of the
photovoltaic system.
Important information:
The assembly system including the modules will load 7 kg/m² (11 kg/m²) to the surface of the roof.
Any additional ballast required to secure the system must also be taken into consideration in accordance
with static calculations. On average, loadings of approx. 5-10 kg/m² are to be expected.
Fig. 5 thermal separation within the module row
Fig. 6 AeroFix South separation between rows
Fig. 7 AeroFix EW separation between rows