21
Time
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- key to
set the current time.
IDE Channel Master/Slave
The onboard PCI IDE connector provides Primary and Secondary channels for
connecting up to two IDE hard disks or other IDE devices.
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and
None. Select ‘Manual’ to define the drive information manually. You will be asked to
enter the following items.
CYLS:
Number of cylinders
HEAD:
Number of read/write heads
PRECOMP:
Write precompensation
LANDING ZONE:
Landing zone
SECTOR:
Number of sectors
The Access Mode selections are as follows:
The time format is:
Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59
CHS
(HD < 528MB)
LBA
(HD > 528MB and supports Logical
Block Addressing)
Large
(For MS-DOS only)
Auto
Video
This field selects the type of video display card installed in your system. You can
choose the following video display cards:
EGA/VGA
For EGA, VGA, SEGA, SVGA
or PGA monitor adapters. (Default)
CGA 40
Power up in 40 column mode.
CGA 80
Power up in 80 column mode.
MONO
For Hercules or MDA adapters.