![background image](http://html1.mh-extra.com/html/ibase-technology/se-603-n/se-603-n_user-manual_4468203021.webp)
Hardware Configuration
SE-603-N User Manual
15
2
2.2 Setting the Jumpers
Set up and configure the SE-603-N by using jumpers for various settings and
features according to the application requirements. Contact your supplier if
you have doubts about the best configuration.
1.2.1 How to Set Jumpers
Jumpers are short-length conductors consisting of several metal pins with a
non-conductive base mounted on the circuit board. Jumper caps are used to
have functions enabled or disabled. If a jumper has 3 pins, you can connect
either PIN1 to PIN2 or PIN2 to PIN3 by shorting.
A 3-pin jumper
A jumper cap
Refer to the illustration below to set jumpers.
Pin closed
Oblique view
Illustration
Open
1-2
2-3
When two pins of a jumper are encased in a jumper cap, this jumper is
closed
, i.e. turned
On
.
When a jumper cap is removed from two jumper pins, this jumper is
open
, i.e.
turned
Off
.
Pin#
1
2
3
1 2 3
1 2 3
1 2 3