![background image](http://html1.mh-extra.com/html/ibase-technology/mi958/mi958_user-manual_3344549020.webp)
INSTALLATIONS
JP10: System Function Connector
JP10 provides connectors for system indicators that provide light
indication of the computer activities and switches to change the
computer status. JP10 is a 20-pin header that provides interfaces for the
following functions.
Hard Disk Drive LED
Reset
Switch
Not Defined
ATX Power On Switch
Not Defined
Power LED
Speaker
Speaker: Pins 1 - 4
This connector provides an interface to a speaker for audio
tone generation. An 8-ohm speaker is recommended.
Pin #
Signal Name
1 Speaker
out
2 No
connect
3 Ground
4 +5V
Power LED: Pins 11 - 15
Pin #
Signal Name
11 Power
LED
12 No
connect
13 Ground
14 No
connect
15 Ground
ATX Power ON Switch: Pins 7 and 17
This 2-pin connector is an “ATX Power Supply On/Off
Switch” on the system that connects to the power switch on
the case. When pressed, the power switch will force the
system to power on. When pressed again, it will force the
system to power off.
16
MI958 User’s Manual
Summary of Contents for MI958
