Hardware Configuration
MB995
User’s Manual
25
2
•
Reset Switch (Pins 17 and 18)
The reset switch allows you to reset the system without turning the
main power switch off and then on again. Orientation is not required
when making a connection to this header.
•
Power LED (Pins 1 and 5)
This connector connects to the system power LED on control panel.
This LED will light when the system turns on.
•
Speaker Connector (Pins 2 and 8)
Connect the two pins for setting up the system output speaker.
2.5.9
S3 Status Connector (J22)
Pin
Signal Name
Pin
Signal Name
1
3VDUAL
2
Ground
3
VCC3
4
Ground
1
3
2
4
Summary of Contents for MB995
