IBASE Technology IB936, User Manual, Page: 49 / 66

DRIVERS INSTALLATIONS
IB936 User’s Manual 45
Drivers Installation
This section describes the installation procedures for software and
drivers under the Windows 98SE, Windows ME, Windows 2000 and
Windows XP. The software and drivers are included with the board. If
you find the items missing, please contact the vendor where you made the
purchase. The contents of this section include the following:
Intel Chipset Software Intallation Utility ............................................. 46
Intel Graphics Driver Installation ........................................................ 48
Realtek HD Code Audio Driver Installation ........................................ 49
Realtek LAN Controller Drivers Installation ....................................... 50
IDE Controller Drivers Installation ..................................................... 52
IMPORTANT NOTE:
1. After installing your Windows operating system(Windows
98SE/ME/2000/XP), you must install first the Intel Chipset Software
Installation Utility before proceeding with the drivers installation.
2. How to create an AHCI driver disk, when your board supports the
RAID/AHC function:
1. Put an empty disc into your floppy disk drive
2. Execute the f6flpy32.exe that is in the Driver CD you have received.
The path is 8.1D\Intel\Q35\Raid\
3
. When IDE Device (HDD, CDROM, etc.) is to be used, one must use a
USB-FDD device (with the IDE device driver floppy diskette inserted) to
install the drivers when Windows is initializing. When Windows is
starting, press F6 and follow the proceeding instructions. The IDE device
drivers can be found in the driver DVD disc that is provided with the
board with location in E:\SCSI\ITE8211\DISK\ (assuming E: is the
DVD ROM drive).