![background image](http://html1.mh-extra.com/html/ibase-technology/ib936/ib936_user-manual_3223866036.webp)
BIOS SETUP
32
IB936 User’s Manual
Advanced Chipset Features
This Setup menu controls the configuration of the chipset.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable
By SPD
ITEM HELP
CAS Latency Time
Auto
Menu Level >
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
Precharge dealy (tRAS)
System Memory Frequency
System BIOS Cacheable
Memory Hole at 15M-16M
PCI Express Root Port Func
Auto
Auto
Auto
By SPD
Enabled
Disabled
Press Enter
** VGA Setting **
PEG/On Chip VGA Control
Auto
On-Chip Frame Buffer Size
8MB
DVMT Mode
DVMT
DVMT/FIXED memory Size
SDVO Device Setting
SDVO LVDS Protocol
SDVO Panel Number
Boot Display
Panel Scaling
Panel Number
Onboard Lan Boot ROM
Onboard IT8211F IDE ROM
128MB
None
1 Ch 18bit
852 x 480
Auto
Auto
1024 x 768 18bit SC
Enabled
Enabled
DRAM Timing Selectable
This option refers to the method by which the DRAM timing is selected.
The default is
By SPD
.
CAS Latency Time
You can select CAS latency time in HCLKs of 3/3 or 4/4. The system
board designer should set the values in this field, depending on the
DRAM installed. Do not change the values in this field unless you change
specifications of the installed DRAM or the installed CPU. The choices
are 3, 4 and 5.
DRAM RAS# to CAS# Delay
This option allows you to insert a delay between the RAS (Row Address
Strobe) and CAS (Column Address Strobe) signals. This delay occurs
when the SDRAM is written to, read from or refreshed. Reducing the
delay improves the performance of the SDRAM.
DRAM RAS# Precharge
This option sets the number of cycles required for the RAS to accumulate
its charge before the SDRAM refreshes.
Summary of Contents for IB936
