7
Jumper Settings on MB967-FT
JP2: Clear CMOS Contents
Use JP2 to clear the CMOS contents.
Note that the ATX-power connector should be disconnected from the board before
clearing CMOS.
JP3
Setting
Function
Pin 1-2
Short/Close
d
Normal
Pin 2-3
Short/Close
d
Clear CMOS
JP3: Clear ME RTC Contents
JP3
Setting
Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear ME RTC
JP4: Watchdog Reboot (WDT) Select
JP7: Flash Descriptor Security Override (ME BIOS Update Jumper)
JP7
Setting
Function
Open
Disable
(Default)
Short/Closed
Enable to update BIOS
JP9: ATX & AT Mode Select
JP9
Setting
Function
Short/Closed
AT Mode
(Default)
Open
ATX Mode
J17: PCIE1 & PCIE2 Golden Finger PCI-e Configuration
J17
Setting
Function
Remarks
Open
Combine to
1x16
For CPU with
1x16 support
Short /
Closed
Separate
to2x8
Default for CPU
with 2x8 support
JP4
Setting
Function
Pin 3-4
Closed
System will reboot upon
the time out of watchdog
timer.
Pin 3-4
Open
Watchdog function
Disabled
