IBASE Technology FWA8108, User Manual

Page: 27 / 54

26
F81866 Super IO Configuration
Aptio Setup Utility
Main
Advanced
Chipset Boot Security Save & Exit
Super IO Configuration
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
F81866 Super IO Chip F81866
► Serial Port 0 Configuration
► Serial Port 1 Configuration
Power Failure
KB/MS Power On
[Always off]
[None]
LAN5,6 Bypass Function
LAN7,8 Bypass Function [Normal]
[Normal]
Serial Port Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO
Device.
LAN5, 6 Bypass Function
LAN5, 6 Bypass Function Setting [Bypass] or [Normal]
LAN7, 8 Bypass Function
LAN7, 8 Bypass Function Setting [Bypass] or [Normal]
F81866 H/W Monitor
Aptio Setup Utility
Main
Advanced
Chipset Boot Security Save & Exit
PC Health Status
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
CPU smart fan control [60 C]
Fan1 smart fan control [60 C]
Fan2 smart fan control [60 C]
CPU temperature +41 C
SYS temperature +35 C
CPU Fan Speed 7315 RPM
FAN1 Speed 7308 RPM
FAN2 Speed 7313 RPM
Vcore +0.928 V
+5V +5.213 V
+12V +12.144 V
1.5V +1.544 V
+3.3V +3.360 V
Temperatures/Voltages
These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only
values as monitored by the system and show the PC health status.
CPU/Fan1/Fan2 Smart Fan Control
This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature
drops to a certain level, it stops turning again.
Serial Port Console Redirection
Aptio Setup Utility
Main
Advanced
Chipset Boot Security Save & Exit
COM0
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Console Redirection [Enabled]
► Console Redirection Settings
COM1 (Pci Bus0, Dev0, Func0)
Console Redirection Port Is Disabled [Enabled]
(Disabled)