Figure 2: Top
Figure 3: Accessory
Alarm activation/deactivation
When an alarm is activated, the Red LED will flash.
Use EG-RC600 Remote Resetter to deactivate.
Battery Changing
Simply remove the screws at the base of the IBase to change battery.
Check battery power by activating the alarm. When alarm sounds or Red LED diminishes,
replace battery.
Note
The IBase is not 100% fool proof. It minimizes foul play by the use of both motion and optical
sensors.
We will make available two more sizes, one larger and one smaller.
For your demo purposes, please feel free to remove the labels at the back of the IBase.
Optical
Sensor
Buzzer
Red LED
ligh
Protective sheet
to be removed
before use.
Motion plate
sensor.
Dummy
buzzer
Self adhesive tape
for fixing to the
bottom of an article
To be positioned
over the optical
sensor
