■
FEATURES
●
Delivers that warm, natural tube overdrive sound previously
unattainable by conventional units.
●
FET electronic switching provides clickless, popfree switch-
ing.
●
Battery can be changed without tools.
●
LED indicator shows status of effect and battery condition.
●
When using the unit for long periods fo time, you can use
external AC power by connecting the adaptor to the EXT.
POWER jack.
●
Zine die cast construction and rugged rubber stopper assures
durability.
■
OPERATION
1
Connect the input jack to your instrument. The circuit is
automatically turned on when a plug is inserted.
2
OVER DRIVE
Adjusts the amount of distortion.
3
TONE
Controls the amount of high frequency contour.
Adds bite to the sound or makes it mellower.
4
LEVEL
Controls the level of the distorted signal, but
does not effect the normal signal. Useful for
matching the distortion level to the normal level
when switching the effect in and out.
5
Soft touch FET electronic switch changes EFFECT/NOR-
MAL.
6
LED indicator comes on when effect is on. If it is dim or
does not light, replace the battery.
7
EXT D.C.
When using external D.C. supply, internal
batteries are switched off.
■
CHANGING THE BATTERY
1
Push the tab
marked “OPEN”
and lift up.
2
Replace the bat-
tery as shown in
fi gure 2.
3
Put the battery
cover into the
groove and push
to the end.
Fig. 3
Fig. 2
Fig. 1
TS-808_E.indd 2
TS-808_E.indd 2
2015-4-15 13:08:58
2015-4-15 13:08:58
