13
1. Remove the battery if it is installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down
and its cut-off corner facing inside the card slot.
3. Push the SIM card completely into the slot.
Note:
• The Mobile supports dual SIM cards, SIM slot 1 & SIM slot 2 both supports 4G networks
but at a time one SIM slot work as a 4G SIM slot.
• Some legacy SIM cards may not function with your device. You should consult with your
service provider for a replacement of SIM card. There may be some fees for this service.
To install the Memory card
To have additional storage for your images, videos, music, and files, you can purchase a
memory card and install it into your device.
1. Make sure that your device is turned off, and then pull the back cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it clicks into
place.
Note:
To remove the memory card, pull it to eject it from the slot.
Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you charge the battery. Some batteries perform best after several full
charge/discharge cycles.
The battery can be charged and discharged many times, but it will eventually wear out.
When the talk time and standby times are noticeably shorter than normal, get the battery
replaced. Use only iBall approved batteries, and recharge your battery only with iBall
approved chargers designated for this device. If a battery is being used for the first time or
if the battery has not been used for a prolonged period, it may be necessary to connect the
charger, then disconnect and reconnect it to begin charging the battery. If the battery is
completely discharged, it may take several minutes before the charging indicator appears
on the display or before any calls can be made.
Note:
Only the AC adapter provided with your device must be used to charge the device.
Connect the USB connector of the AC adapter to the sync connector on your device, and
then plug in the AC adapter to an electrical outlet to start charging the battery.
