27
with ISP until the connection is established. Manually mode
in
the device will not
make the link until someone clicks the connect-button in the Status-page.
5.
NAT disable:
If you enable this option, it will act with a non-NAT function.
6.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and IGMP
v3.
7.
IGMP Snooping:
enable or disable IGMP snooping function.
8.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting. (Range :
1~4094)
B. Static IP Address
1.
WAN assigned IP address/ Subnet mask/ Gateway IP
.
2.
Primary DNS/ Secondary DNS:
Input the Primary/Secondary DNS if
necessary.
3.
NAT:
If you enable this option, it will act with a NAT function.
4.
NAT disable:
If you enable this option, it will act with a non-NAT function.
5.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
6.
IGMP Snooping:
enable or disable IGMP snooping function.
7.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
