36
WDS Only Mode
“WDS Only mode”
With the function Router can bridge two or more WLAN’S.
Note: If this checkbox is selected, you better make sure the following settings are correct.
1. Wireless Bridging:
You could enable this function by selecting “Enable”.
2. Remote AP MAC 1~Remote AP MAC 2:
Enter the wireless MAC into the blank.
3.
Encryption type:
Select the appropriate category. Once you set up that type of
encryption, second LAN PC must enter the same encryption type as the first one.
4.
Encryption key:
Set up encryption key based on the rule of encryption type. Once
you set up encryption, second LAN PC must enter the same encryption type as the
first one.
