iB-WR7011A
150M 1-Port Wi-Fi ADSL2+ Router User Guide
5
2.2 The Back Panel
Figure 2-2
DSL
: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.
Wi-Fi
: Press this button for short time, used to Enable/Disable wireless
RESET
: There are two ways to reset the Router's factory defaults.
Method one
: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two
: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
Ethernet
: Through the port, you can connect the Router to your PC or the other Ethernet
network devices.
ON/OFF
: Switch ON/ OFF the router.
2.3 Installation Environment
The Product should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
The Router can be placed on a shelf or desktop.
Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
