iBall Baton DWA-N150 Series, Manual

Page: 53 / 84

50
Field Description
RIP-enabled devices.
Apply Click it to save the settings of this page.
Interface Choose the router interface that uses RIP.
Recv Version Choose the interface version that receives RIP messages.
You can choose
RIP1 , RIP2 , or Both .

Choose RIP1 indicates the router receives RIP v1
messages.

Choose RIP2 indicates the router receives RIP v2
messages.

Choose Both indicates the router receives RIP v1 and
RIP v2 messages.
Send Version The working mode for sending RIP messages. You can
choose
RIP1 or RIP2 .

Choose RIP1 indicates the router broadcasts RIP1
messages only.

Choose RIP2 indicates the router multicasts RIP2
messages only.
Add Click it to add the RIP interface to the Rip Config List .
Delete Select a row in the Rip Config List and click it to delete
the row.
5.4.2 NAT
DMZ
Demilitarized Zone (DMZ) is used to provide Internet services without sacrificing
unauthorized access to its local private network. Typically, the DMZ host contains devices
accessible to Internet traffic, such as web (HTTP) servers, SMTP (e-mail) servers and
DNS servers.
Choose Advanced Settings
> NAT > DMZ , the page shown in the following figure
appears.
The following describes how to configure manual DMZ.
Step 1 Select WAN interface.
Step 2 Enter an IP address of the DMZ host.
Step 3 Click Apply Changes to save the settings of this page temporarily.