48
The following table describes the parameters and buttons of this page:
Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to the
destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the
Static Route Table
.
Update
Select a row in the
Static Route Table
and
modify the
parameters. Then click it to save the settings temporarily.
Delete
Selected
Select a row in the
Static Route Table
and click it
to delete the
row.
Show Routes
Click it, the
IP Route Table
appears. You can view a list of
destination routes commonly accessed by your network.
Static Route
Table
A list of the previously configured static IP routes.
Click
Show Routes
, the page shown in the following figure appears. The table shows a
list of destination routes commonly accessed by your network.
IPv6 Static Route
Choose Advanced Settings
>
Routing
>
IPv6 Static Route
, and the page shown in the
following figure appears. This page is used to configure the routing information. You can
add or delete IP routes.
Summary of Contents for DWA-N150 Series
Page 1: ...802 11b g n wireless ADSL Router Model No DWA N150Series Ver 1 0 0...
Page 16: ...13 Figure 1 Status 1 Figure 2 Status 2...
Page 17: ...14 Figure 3 Status 3...
Page 37: ...34...
