iBaby Monitor User Manual
20
1)Please use the iPhone’s original USB cable.
2)Verify that your phone has connected to your Wi-Fi network.
3)The power adapter has been plugged and the device has started (the LED status light
on the back of the monitor is a blinking red light).
4)Unplug the power adapter and then plug back it.
Q5.
How to install the monitor when the Wi-Fi settings have been changed?
iOS Device:Please use the USB cable to connect your iOS device and the monitor. And
then click
“
Allow
”
when you see a prompted message
“
Share Wi-Fi Settings?
”
.
Android Device:Reset the monitor and then reinstall it. As for the specific steps about reset,
please refer to
“
Q6
”
of section 4.4.
Q6.
What should you do if you forget
your
password?
When you forget your login password, please enter the email address you used at
registration, and then click
“
Send
”
. There will be a link sent to your mailbox which is used
for resetting your login password. Please click the link to reset the login password within 1
hour.
Figure 18
5.3 Loading Wheel
Q1.It is very slow on the main viewing screen when viewing at home(the LED status
light on the back of the monitor sometimes is a steady green light, and sometimes
it is a steady red light).
When the LED status light is a steady red or green light, it indicates an unstable Wi-Fi
connection. You should optimize the Wi-Fi settings by following the tips as below:
1)If you have a dual band router, we recommend that your monitor connects 5GHz Wi-Fi .
2)If you use a regular router on 2.4GHz,you can login to the router to optimize the Wi-Fi
settings. Select 20M as the bandwidth if it is a TP-Link router(if it is a NETGEAR router,
enable 20/40MHz coexistence).
3)If the router is far away from the monitor(or there are multiple walls between the router
and the monitor),please place the monitor near the router as close as possible to have a
try.
4)The router might have a heavy load, please unplug the power cord of the router and then
plug back it to restart.
Deleted:
the
Summary of Contents for M7
Page 1: ...iBaby Labs Inc ...
