ibaW-750
Manual
Issue 1.1
39
9.3.3
Diagnostics
With the
Diagnostics
module, information about the ibaNet-E connection can be acquired
as signals.
9.3.3.1 Add and assign diagnostic module
A diagnostic module becomes active only after assignment to an ibaW-750 module and
provides its connection information. By using a diagnostic module you can record and
analyze the diagnostic information continuously in the ibaPDA system
Diagnostic modules do not consume any license connections, since they do not establish
their own connection, but refer to another module.
To add a diagnostic module, select the type "Diagnostics" in the dialog "Add module”.
Figure 31: Add diagnostics module
Then the target module is assigned.
Figure 32: Select target module
