Manual
ibaW-750
34
Issue 1.1
two points in the line equation. Gain and offset are then calculated automatically.
Active
Enabling/disabling the signals
Actual
The actual measured value is displayed here
You can show or hide more columns via the context menu (click with the right mouse
button in the headline).
9.3.1.3 Digital tab
The signal table for digital signals is automatically adjusted for each terminal type and
arranged in the order of addition.
Figure 26: Module ibaW-750 – Digital tab
The signal “K-bus valid” is available by default. It can be enabled/disabled.
The meaning of the columns is the same as in the
Analog
tab. Here, however, there are
not the columns Unit, Gain and Offset.
