ibaPADU-D-8AI-U/-D-8AI-I
Manual
Issue 1.4
29
Connector type
1 x 16-pin multi-pin connector;
clamp-type terminal (0.2 mm² to 2.5 mm²), screw connection,
included in delivery
ibaNet interface
Number
1
Design
Fiber optic cable
ibaNet protocol
32Mbit Flex
Allows the simultaneous connection of up to 15 devices in a fi-
ber optic ring
Can be used simultaneously for data, settings and service
(e. g. updates)
Data transmission rate
32 Mbit/s
Sampling rate
Up to 40 kHz, freely adjustable
Connector type
2 ST connectors for RX and TX
The use of
fiber optic cables of type 62.5 μm/125 μm is rec-
ommended. For information on cable length, see chap. 10.3
Transmitting interface (TX)
Output power 50/125 µm FO cable
-19.8 dBm to -12.8 dBm
62.5/125 µm FO cable
-16 dBm to -9 dBm
100/140 µm FO cable
-12.5 dBm to -5.5 dBm
200 µm FO cable
-8.5 dBm to -1.5 dBm
Temperature range -40 °F to 185 °F (-40 °C to 85 °C)
Light wavelength 850 nm
Receiving interface (RX)
Sensitivity
-30 dBm
Temperature 77 °F (25 °C)
Power supply
Power supply
24 V DC (±10%)
Power consumption max.
10 W
Connector type
1 x 2-pin multi-pin connector;
clamp-type terminal (0.2 mm² to 2.5 mm²), screw connection,
included in delivery
Further interfaces, operating and indicating elements
Ethernet
RJ45 socket (for service purposes only)
Indicators (LEDs)
4 LEDs for device status
8 LEDs for status of analog inputs
8 LEDs for status of digital inputs
Switch
1, address setting
3
Data for other FO cable diameters not specified
