ibaPADU-4-AI-U
Manual
Issue 1.1
19
Auto enable/disable
When this option is enabled and ibaPDA cannot connect to this device during the
start of the acquisition then it will disable this module and start the acquisition with-
out it. During the acquisition it will try to reconnect to the device. When it succeeds
it will automatically restart the acquisition with this module enabled. If this option is
not enabled then ibaPDA will not start the acquisition when it cannot connect to the
device.
Further functions
Read configuration from device
By means of this command, you can read the configuration from the device.
The changed settings become valid by clicking on <OK> or <Apply>.
9.3
ibaPADU-4-AI-U – “Analog” tab
Figure 8: ibaPADU-4-AI-U – ”Analog“ tab
Name
Assign a meaningful name to each signal and you can enter additionally two com-
ments when clicking on the symbol in the field “Name”.
Unit
Here, you can enter the physical unit of the analog value, default value is “V”.
Input range
You can select the input range for each signal from a drop-down menu.
