ibaMS16xAO-10V/-20mA
Manual
Issue 1.4
17
8.3
Update
An update can be installed in two different ways:
Web interface (only with ibaPADU-S-IT-2x16)
ibaPDA
No matter which of the both ways you choose to install an update: the progress of the
update is shown by the LEDs L5 … L8. Beginning with L5, the LEDs are flashing one
after another, at first in orange and then in green and at a slower rate. When the update
is completed, the device reboots automatically.
8.3.1
Update via Web interface
Important note
The Web interface is available only with the central unit ibaPADU-S-IT-2x16.
Start the Website of the iba-modular system in your browser and select the central
unit.
On the “update“ tab, click on the <Browse…> button and choose the
<padusit2x16_ v[xx.yy.zzz].iba> update file.
By clicking on <Start Update>, you start the update.
Figure 4: Update via Web interface
Important note
When updating the iba-modular system, a possible autostart of the ibaLogic PMAC is
deactivated and the existing ibaLogic-V5 application deleted. Furthermore, an update
of the ibaLogic-V5 software (ibaLogic Clients) might be necessary.
