background image

02

01- Lid. 
02- Juicer Chamber.
03 - Motor Housing Flange.
04- Motor Housing.
05- ON/OFF Switch.
06- Base.
07- Sieve.
08- Jar.
09- Crown for orange.
10- Crown for lemon.

Picture - 01

07

08

01

02

03

04

05

06

07

09

10

Table - 02

*Lack  of  electric  power 
source. 

*  The  machine  does  not 
switch on.

Problems

Causes

Soluções

*  Problems  in  the  electrical 
circuit.

*  Check if plu is connected 
to  its  socket,  or  if  there  is 
electric shortage.

*  Crown  turns  but  when  in 
contact  with  the  product,  it 
stops.

*  Crown  groove  worn  uot  or 
broken.

*  Call technical assistance.

* Change the crown.

ES-100 

5.2 Electrical Diagram

ON/OFF Switch

1. Introduction

1.1

Safety

The Juice Extractor ES-100 is a machine simple to use and to clean.  However 

for your safety read the following instructions in order to avoid accidents:

1.1.1 -Unplug the machine when you need to remove any removable part during 

cleaning, servicing or any other operation.

1.1.2 - Never make use of any tool or instrument that is not originally part of the 

machine during any operation. 

1.1.3 - Before switching the machine on check if Crown Nº 09 or 10 and the 

Juice Chamber Nº02 (Pic-01) are firmly fitted in their right positions.

1.1.4 - Never throw water directly to the machine.
1.1.5 - Never use inappropriate clothes mainly long sleeves during operation.
1.1.6 - Do not operate the machine wearing wet clothes or wet shoes.
1.1.7 - Before operating the machine be sure it is grounded properly.

1.2

Main Components

All components of this machine were designed and made to its proper function 

according to pattern tests and experience of Siemsen.  

4.6.2

Advice

Electrical or mechanical maintenance has to be undertaken by qualified personal.  

Person in charge has to be sure that the machine is under TOTAL SAFETY conditions 
when working.

4.7

Advice

Electrical or mechanical maintenance must be done by qualified personal for such 

operation.

Person in charge has to be sure that the machine is under TOTAL SAFETY 

conditions when working

5

Analysis and Problems Solving

5.1 Problem, causes and solutions

The Juice Extractor ES-100 was designed to operate with the need of minimum 

maintenance but the natural wearing caused by longer use of the equipment may 
occasionally cause some malfunctions.

If such problem occurs with your mixer refer to Table 02 in which the most 

common situations are listed with recommended solutions.

Summary of Contents for ES-100







Reviews: