03
1.3 Características Técnicas
Table - 01
Characteristics
ES-100
15
110 ou 220
50 ou 60 (*)
320
0,18
390
240
195
2,2
Average Production
Voltage
Frequency
Rating
Consumption
Height
Width
Depth
Net Weight
Gross Weight
Unid.
Oranges/min.
[V]
[Hz]
[W]
[kW/h]
[mm]
[mm]
[mm]
[kg]
[kg]
2,5
06
2. Installation and Pre Operation
2.1 Installation
The Juice Extractor ES-100 is to be installed onto a leveled surface
approximately 850mm high.
Check if the voltage to which it will be connected is 110V or 220V.
2.2 Pre Operation
IMPORTANT
When placing the Crown Nº 09 or 10, check if it is firmly fitted.
Check if the Juice Extractor is firm in its position. Before using it, wash all food-
contact parts with water and neutral soap.
3. Operation
3.1 Starting
IMPORTANT
Always disconnect machine from power source before changing the Crown.
Make sure the Crown is properly fitted.
To start operating turn the ON/OFF switch Nº05 placed at the Motor Housing Nº
04 (Pic-01).
4.2.3 Precautions
The electric cable has to be compatible with the power required by the machine.
Cables touching the floor or close to the machine need to be protected against short
circuits.
Oil reservoir has to be full up to the required level as indicated. Check level and
add oil if necessary.
4.3 Routine Inspection
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT introduce your
fingers between the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precautions
Check if motors and sliding or turning parts of the machine produce abnormal
noises.
Check the tension of the belts and chains and replace the set when belt or chain
show signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your fingers
between belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
4.4 Operation
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts
which could lead to a serious accident. Tie your hair up well and/or cover your head with
a scarf.
The operation performed by not trained or skilled personnel shall be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.5
After Finishing The Work
4.5.1
Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket before
cleaning the machine. Never clean the machine unless it has come to a complete stop.
Put all components back to their functional positions before turning it ON again.
Check level of oil. DO NOT place your fingers in between belts and pulleys nor chains
and gears.
4.6
Maintenance
4.6.1
Danger
Any maintenance with the machine in working situation is dangerous. TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
(*)The machinemotor has only one voltage, in with its label 110 or 220V.
The machine motor frequency shall be only one 50or 60Hz
