Modello - Modèle - Model
Modell - Modelo
VIC CREAMY
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
22/68
N° DOC
UM000551
8.
NOTES AND WARNINGS
The appliance described in this manual conforms with Machine Directive 2006/42/CE.
The content of this manual is technical and the property of EPTA s.p.a. It is forbidden to reproduce,
distribute or modify entirely or partially its content without written authorisation.
The owner company safeguards its rights pursuant to legislation in force.
Read the manual carefully and adhere to the contents before installing and using
the appliance.
The company cannot be held in any way liable for any damage to people, animals or the product
conserved in the event of:
•
Improper use of the equipment or use by unsuitable or unauthorised staff.
•
Incorrect installation or power supply not suitable for the appliance.
•
Non-compliance with this manual.
•
Non-compliance with the maintenance program.
•
Unauthorized modifications to the appliance.
•
Installation of non-original spare parts on equipment.
•
Installation and use of the equipment for aims differing from those specified in this manual.
•
Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of the
technical staff responsible for the activities planned on the equipment, who must ensure the
authorised staff:
•
Are qualified to perform the task requested
•
Know and strictly comply with the provisions contained in this document
•
Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment, use of
accessories that change its use and use of spare parts differing from those recommended can
cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and
however no guard (grids, casings) should be removed by unqualified staff; strictly avoid
operating the freezer with these guards removed.
9.
POSITIONING
The equipment is fitted with 4 swivel wheels (2 with a brake) for movement and positioning.
Do not try to overcome steps or steep ramps: such operation may damage the
wheels. It is strictly necessary after positioning to stabilise the equipment on the
ground.
