Modello - Modèle - Model
Modell - Modelo
GELÉ
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
14/50
N° DOC
7. IMPORTANT INFORMATION ON FOOD WASTE
6. AMBIENT CONDITIONS
8. LOADING
It is recommended to attentively follow the preservation instructions on the product packaging and the instructions provided by the
food manufacturers.
Therefore, the temperature settings must be suited to the preservation characteristics of the food products in line with the indications
given by our technical documentation.
Incorrect uses can cause early deterioration of the food products.
This unit is intended to operate in environments in which the temperature and the humidity fall within the limits provided for in this
User and maintenance Manual.
Warning! It’s absolutely forbidden to place the product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to avoid altering correct air circulation and thereby avoid a higher
product temperature.
Warning! Do not put bottles or other glass containers in the freezer compartment as they might crack
or break when the contents are frozen.
Ne jamais introduire de nourriture chaude à l’intérieur du congélateur ; attendre que la nourriture refroidisse naturellement à
l’extérieur. Ne pas remplir complètement le congélateur. Il devrait y avoir un espace raisonnable entre les produits pour une
meilleure congélation.
9. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the use
of fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork lift, either
manual or electric, provided it is adequate for handling such appliances and it has the requisite lifting
capacity.
During freezer transport, the angle between the freezer casing and the ground must not exceed 45°.
If the freezer is overturned or tilted during transport, wait approximately 2 hours before switching it on.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
10. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres. The unit is shipped anchored
onto a wooden base and protected by corner posts, cardboard top and nylon wrapping. Keep all packaging away from children. For
each subsequent handling of the cabinet, the use of the wooden platform is recommended.
Carefully remove the packaging, taking care not to damage the components and not to throw away those that will be needed for
assembly.
ATTENTION! After unpacking, check that the appliance has not suffered damage during transportation.
THE REFRIGERATOR IS NOT SUITABLE FOR
WORKING IN DANGEROUS ENVIRONMENT
WITH RISK OF FIRE, EXPLOSIONS OR
RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate.
CLIMATE CLASS
ENVIRONMENT
OPERATING
TEMPERATURE (°C)
RELATIVE HUMIDITY
(%)
A
30
55
B
35
75
C
40
40
