IAI ELECYLINDER EC-RTC9, Instruction Manual

Page: 141 / 226

6.4 Parameter function descriptions
6-7
6. Parameter
s
Parameter No. 2: Auto switch "LS" signal detection range adjustment
No. Category Name
Symbol Unit Input range
Default setting
at shipping
2 A
Auto switch
"LS" signal
detection
INP degree Actuator Depended
to 9999.99
0.10
● Sets the backward complete / forward complete ON trigger range relative to the backward
end / forward end.
● When the ELECYLINDER enters the detection range, the backward complete or forward
complete signal turns ON.
● The minimum setting unit is 0.01 degrees.
The LS signal detection range for
the conditions below is shown in
the figure.
Backward end : 0.00 degrees
Forward end
: 100.00 degrees
Parameter No. 2 : 0.10 degrees
Caution
A value smaller than the minimum resolution cannot be set.
Minimum resolution [deg./p] = (360 ÷ reduction ratio) [deg./r] ÷ 800 [p/r]
Configuration example
Forward end
100.00 degrees
Backward end
0.00 degrees
[LS1 detection range]
99.90 to 100.10 degrees
[LS0 detection range]
-0.10 to 0.10 degrees