background image

        

Environmental protection advice

All the materials used are environmentally compatible and recyclable.Please make your contribution

to conserving the environment by using the separate waste collection channels available.

Read carefully all the instructions contained in this booklet. It provides you with important

information regarding the safe installation, use and maintenance of the appliance as well as

useful advice for getting the best out of your oven. Keep this booklet in a safe place for future

reference.

The manufacturer pays particular attention when printing its instruction manual however misprints may

occur. If the texts are unclear, please contact the service centre for explanations.

After removing the packing, check that the appliance is not damaged in any way. Be careful not to

leave the packing materials (plastic sheeting, expanded polystyrene etc.) in reach of children, as they

can be dangerous.

IMPORTANT: do not use the oven door handle to move the appliance, such as when removing

it from the packaging.

WARNING:

Before using the appliance, do not forget to remove the protecting parts of the appliance.

GENERAL INFORMATION

Oven's ratings and serial number are written on

the data plate (A) and (B) sealed inside the front

of the oven.

WHEN YOU CALL FOR SERVICE

When you call for service or order parts for
 your unit, be sure to give:

1. MODEL
2. SERIAL NUMBER
3. COLOUR
4. PART NAME and/or description of problem
5.  YOUR FULL NAME, ADDRESS, and HOME

    TELEPHONE

NUMBER and BUSINESS TELEPHONE

NUMBER IF APPROPRIATE.

Servicing shall be carried out only by authorised

personnel.

ENVIRONMENTAL WARNING
Waste packaging

Do not throw the packaging of your appliance into the dustbin,

but pick out the different materials (for instance foil, paperboard,

polystyrene) according to the local rules for rubbish elimination.

This appliance must only be used for the purpose of domestic

cooking.

RECORD HERE FOR EASY REFERENCE

Model                                                  Colour

Serial Number

Installation Date

Dealer's Name and Address

2

GENERAL WARNINGS

A

WARNING

Remember ovens get hot: some parts naturally become

very hot, notably the glass oven door and the protective

strip. KEEP CHILDREN AWAY FROM Oven AT ALL

TIMES AND WARN THEM ABOUT THE DANGER.

When connecting or using appliances connected to a

plug near your oven KEEP THE MAINS CABLE FAR

FROM HOT SURFACES OF THE OVEN.

Front oven

(A) Data plate

(B)  Serial

     number

Summary of Contents for IOGFS

















Reviews: