IAG IOGFS, Installation And Operation Manual

Page: 12 / 16

PCI "Campanil"TR 259 Analogic (Fig. 7L)
Setting the clock
Pull the control knob and turn clockwise.
Alarm programme adjustement
Turn the knob clockwise without pulling it in.
At the end of the programmed time an alarm will
sound. To cancel it, turn the knob to the bell.
Turn the knob clockwise, stopping the pointer
in line with the selected time. The timer can be
set from 1 to 60 minutes. When the preset time
is over, a buzzer will sound.
XII
XI
X
IX
VIII
VII
VI
V
I
II
III
IV
Fig. 7L
Fig. 7M
1 Time of the day
2 Timing and insertion
3 Signal timng and insertion
Fig. 7N
12
MINUTE COUNTERS (fig. 7N)
O
45
5
35
25
15
55
Reset timer
Press “+” and “-” buttons together and release
“+” button first.
Signal
The signal after time out will stay 7 minutes if it
has not been reset with the “+” button (one touch
only).
Signal frequency
When the display shows the time of day, the signal
frequency can be selected by pressing the “-”
button. Three different frequencies are selectable.
ELECTRONIC TIMER FOR COOKER (Fig. 7M)
Functions
On
The display flashes.
Time setting
Press the left button.
Set the time with buttons “+” and “-”.
This function remains activated 7 seconds after
the last +/- operation.
Timer setting
This function is permanently activated and it will
be immediately set with +/- buttons.
During setting the units are 10 seconds.
During count down the timer takes priority on the
display.
The units are seconds.
The maximum time is 99 minutes.
The relay contact (when available) is closed during
the count down only.