7
IDENTIFICATION OF CONTROLS
Connection Panel
1
Antenna
Wi-Fi antenna. (Tighten the Wi-Fi antenna in clockwise direction)
2
USB (Type-C)
Connect USB devices to this port for Android.
3
USB
Connect USB devices to these ports for Android.
4
USB
Connect USB devices to this port for Android.
Note:
use this USB-port for software updates.
5
HDMI OUT
Connect a monitor to this port, output of the currently screen.
6
Press to switch the screen on or off.
When the screen s turned on, press the button to show the Navigation bar.
Press the button for about 2 seconds and the screen will go into stand-by mode.
7
HDMI1/2/3 INPUT
Connect a HDMI or DVI device to this jack.
HDMI 3(ARC): Connect an ARC-enabled home theater receiver to this jack.
8
DP INPUT
Connect an external device to DP out jack.
9
PC IN
Connect the video/ audio of a computer to these ports.
10 RS-232C
For remote control, service and other uses.
11
Earphone
Connect headphones to this jack. The screen is the current audio output.
12 S/PDIF digital audio output Connect a digital sound system to this jack.
13 TOUCH OUT 1/2
Output for external devices connected to PCx, HDMIx or DP ports, which support touch
systems.
14 LAN IN
Connects the external network or the router.
Note:
If the VGA does not get any signal it will go into stand-by after two minutes, while others source
does not get any signal it will go into stand-by mode after 10 minutes.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
