10
BASIC OPERATIONS
Turning the screen on or off
1.
Plug the power cord into an AC power outlet.
2.
Switch the Power Switch on the screen on.
3.
Now the screen is in standby mode. Wait a moment until the power indicator lights up, then press
button to turn on the screen.
Note:
Be sure to wait for a few seconds before pressing button. If you promptly press button
then the screen may not respond or act wrongly.
4.
Press button for about 2 seconds to put the screen in standby mode.
5.
Switch the Power Switch off to cut off the power completely.
Note:
If the VGA does not get any signal it will go into stand-by after two minutes, while others
source does not get any signal it will go into stand-by mode after 10 minutes.
The first time installation
Connect to power source and turn on the screen, the below installation menu page will display on the
screen.
Select the desired menu language. Press
START
to
go to the next page.
Select location and press
NEXT
to finish the
installation.
