i3 L3502 W UM User Manual Download

Page: 23 / 60

Appendices

Installation

i3PROJECTOR

manual L3502W UM

Installation

User Controls

Installation

i3PROJECTOR

manual L3502W UM

User controls

Sharpness

Adjust the sharpness of the image.



Press the <− button to decrease the sharpness.



Press the −> button to increase the sharpness.

Saturation

Adjust a video image from black and white to fully saturated

color.



Press the <− button to decrease the amount of saturation in

the image.



Press the −> button to increase the amount of saturation in the

image.

Hue

Adjust the color balance of red and green.



Press the <− button to increase the amount of green in the

image.



Press the −> button to increase the amount of red in the image.

Gamma

Effects the representation of dark scenery. With greater gamma

value, dark scenery will look brighter.



“Sharpness”,

“Saturation” and

“Hue” functions

are only supported

under video mode.

Summary of Contents for L3502 W UM





























































Search results

Summary of Contents for L3502 W UM

Reviews:

Related manuals for L3502 W UM

Brands by name

Popular brands

i3 L3502 W UM, User Manual

Search results

Summary of Contents for L3502 W UM

Reviews:

Related manuals for L3502 W UM

Brands by name

Popular brands