Appendices
Installation
13
i3PROJECTOR
manual L3502W UM
Installation
13
i3PROJECTOR
manual L3502W UM
Powering the Projector On / Off
Turn on the pro-
jector first and
then select the
signal sources.
Powering On the Projector
1. Securely connect the power cord and signal cable. When
connected, the POWER/STANDBY LED will turn Orange.
2. Turn on the lamp by pressing “ ” button either on the
projector or on the remote. At this moment, the POWER/
STANDBY LED will now turn Blue.
The startup screen will display in approximately 10
seconds. The first time you use the projector, you will be
asked to select the preferred language and power saving
mode.
3. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc).
The projector will detect the source automatically. If not,
push menu button and go to “OPTIONS”.
Make sure that the “Source Lock” has been set to “Off”.
If you connect multiple sources at the same time, press
the “INPUT” button on the control panel or direct source
keys on the remote control to switch between inputs.
When the
power mode is
in standby mode
(power consump-
tion < 0.5W), the
VGA output/input
and audio will be
deactivated when
the projector is in
standby.
POWER/STANDBY
1
INPUT
MENU
LAMP
TEMP
ON(B)
STANDBY(R)
Enter