d)
List of Menu Settings
Picture
Picture Mode
Select the picture (Standard, Bright, Soft, PC, Custom).
Contrast
Measure the luminance between the brightest white and the darkest black that can
be produced in the light and dark areas of a picture.
Brightness
Adjust the overall brightness of pictures: increase the analog value to enhance the
brightness; decrease the analog value to reduce the brightness (0-100).
Hue
Adjust the hue of pictures: increase the analog value to change the hue to green;
decrease the analog value to change the hue to purple (0-100).
Sharpness
Adjust the black-white gradation of pictures: increase the analog value to improve the
sharpness; decrease the analog value to reduce the sharpness (0-100).
PC Screen Adjustment Automatically correct the screen (valid only under VGA-signal).
Saturation
Adjust the color depth of pictures: increase the analog value to increase the color
depth; decrease the analog value to reduce the color depth (0-100).
Color Temp
Adjust the overall color temperature of pictures: Standard, Warm and Cold.
Zoom Mode
Adjust the aspect ratio: Full Screen, 4:3, Movie and Subtitle.
PC image adjustment
Adjust the image display range in PC mode (available under PC signal source).
Remark: the analog values of Contrast, Brightness, Hue, Sharpness and Saturation are adjustable only in User
Mode.
Sound
Sound mode
Select the sound effect mode: Standard, Music, Movie, and User.
Low Pitch
Adjust the bass level: increase the analog value to raise the bass level; decrease the
analog value to lower the bass level (0-100).
High Pitch
Adjust the treble: The bigger the analog value (0-100), the higher the treble.
Balance
Adjust the balance between left and right channels: adjust the analog value leftward
to increase the volume of left channel; adjust the analog value rightward to increase
the volume of right channel (L50-R50). Generally, the balance is set to 0.
SPDIF OUT
Select the digital sound output mode: PCM, RAW, and OFF.
Remark: the analog values of Bass and Treble are adjustable only in User Mode.
Settings
Menu Time
Adjust the OSD time: 5s; 10s, 15s, 20s, 30s, and Constant.
MHL Auto Switch
Adjust MHL auto switch: two modes are available, namely “ON” and “OFF”; it is non-
adjustable only under HDMI4.
HDMI_CEC
Adjust HDMI-CEC mode: two modes are available, namely “ON” and “OFF”.
HDMI EDID Version
Adjust HDMI EDID version: Default Mode, EDID1.4, and EDID2.0.
Restore to Defaults
Restore all settings to factory defaults,and restart the system.
Remark: different models, different sources, and the menu options may be different, please refer to the actual
conditions.
