i3-TECHNOLOGIES i3lighthouse l3502wi, User Manual

Page: 4 / 16

4 | Discover more products at i3-learning.com

Do not look directly into the light source of the projector. This could cause permanent loss of
vision.
 Caution should be taken with the intended use near persons with an epileptic condition. These
persons may experience seizures when viewing certain kinds of flashing lights or patterns.
CAUTION
To avoid the risk of electric shock or fire which may result in minor or moderate injury:

Do not use non-conforming replacements parts.
 Do not place wet objects on, or inside the cabinet.

Do not place foreign objects behind the internal cover.

Ensure that connecting the unit to the power source will not overload the power source.
To avoid the risk of product damage:
 Move the unit with care. This product and its components contain fragile parts. Dropping the
unit may cause internal dislocation or shattering of glass parts.

Ensure the wheel brakes are latched when operating.
 Use the product on an appropriate flat and level surface.
To avoid possible environmental contamination:
 The lamp inside this product contains mercury (Hg) and must be recycled or disposed of in
accordance with local, state, or federal laws. Check your individual country requirements to see if
specific recycling requirements exist for mercury containing products or other electronic
products.
 Dispose of the unit according to applicable governmental regulations.
Important notes
 In extreme temperature and humidity transport situations, you may observe condensation
behind the lens cover of the i3PROJECTOR. To resolve this condition, place the unit where it will
be used and allow a 24-hour environmental stabilization period prior to use. Any noticeable
condensation is temporary and will have no long term effect on the operation of the unit.
 Unplug the power supply cord by holding the plug. Do not pull on the cord.

Do not connect or disconnect this product during an electrical storm.

Install the unit in a well ventilated area. Always maintain adequate ventilation to protect the
components from overheating and to ensure reliable and continued operation.
 Passive heat may cause damage to plastic materials. Do not expose to excessive sunlight or
other heat sources.

We recommend that an adult observes any young users when playing video games. If you or any
user experiences any of the following symptoms: dizziness, altered vision, eye or muscle
twitching, involuntary movements, loss of awareness, disorientation, or convulsions, discontinue
the use immediately and consult a physician.
Maintenance instructions
 Do not install the unit in a place where ventilation may be hindered. Always allow an adequate
ventilation to protect the components from overheating. The cabinet was designed with
ventilation in mind, do not block these openings or vents.
 Prefer to use in low dust environments. Increase the frequency of cleaning the dust filters of the
projector according to the environment.

More specific maintenance instructions of the i3PROJECTOR can be found in its own User
Manual on http://www.i3-learning.com.
 Keep the entire lighthouse clean and clear of gathering dust.