4
NOTES OF USE
(1) Lens mount
For the installation of CS Mount lenses only.
(2) Back Focus adjustment :
A.Back Focus Screw :
Loosen this screw before you use the Focus
Adjustment. To maintain the correct focus
afterwards, ensure that it is tightened.
B.Focus Adjustment :
Adjust this dial to obtain correct back-focus
whilst using a CS mount lens.
(3) Exposure control
Use these holes to connect to a bracket
or to a housing according to your applications.
Two types of lenses are appropriate for this
function :
A.DC IRIS lens :
Set the IRIS slide switch to the DC position and
adjust the LEVEL control in the OSD menu.
B.Video IRIS lens :
Set the IRIS slide switch to the VIDEO position
and adjust the LEVEL and ALC controls on the
lens to obtain a clear picture.
(4) Up button
Use this button to move the cursor upward
or to select different settings in the OSD menu.
(5) Left button
Use this button to move the cursor to the
left or to exit the selected item in the OSD
menu.
(6) Enter button
Use this button to enter the selected item or
to confirm the settings in the OSD menu.
(7) Down button
Use this button to move the cursor
downward or to select different settings in the
OSD menu.
(8) Right button
Use this button to move the cursor to the
right or to enter the selected item in the OSD
menu.
•PART NAMES AND LOCATIONS
